AR Viewer

Explore the AR Viewer layout and learn how to use it.

Start View AR

Viewing your sketch in a real-world space provides a unique perspective. Use the AR Viewer to bring any note to life.

Tap View AR in System Menu

Start the AR Viewer from the system menu at the top right of the screen. Once tapped, a QR code will be provided, which can be scanned with another device that has a camera for AR viewing.

View Sketch in AR

You can view AR directly on your current device. Tap View Sketch in AR to enter the AR view preparation page. Tap Start AR in the center of the screen to begin.

Set Position of Your Sketch

When you enter the AR viewer, use the camera to find a flat surface. The fewer objects around, the better the recognition. When a round icon appears on the floor and your sketch appears in a semi-transparent state, touch the screen to set the position of your sketch. You are now ready to view it.

Reposition Your Sketch

Touch and hold the screen to enter reposition mode. After finding the desired spot, lift your finger off the screen to place the sketch there. You can also drag left or right while holding to rotate the sketch.

Navigation

Navigation in the AR Viewer is similar to navigation in the note but with some differences.

The basic navigation methods are displayed at the bottom right of the screen. Touch and drag with one finger to rotate the sketch. Pinch with two fingers to scale the sketch up or down, and swipe up and down with two fingers to adjust the height of the sketch. You can hide or reveal the instructions by tapping the ? icon at the top right of the screen.

Switch Orbit Method

Tap the four-way arrow icon at the top right of the screen to switch the orbit method. You can switch between Turntable and Trackball modes. In Trackball mode, you can rotate the sketch to view the bottom or top. Tap the circular arrow icon below the switch orbit method to reset all rotations of the sketch.

Turntable Animation

Tap the rotating arrow icon at the top right of the screen to apply turntable animation. The turntable animation continues during navigation and stops when the icon is tapped again.

Group Tab in AR Viewer

Toggle Group Visibility on or off

Tap the Stage Panel icon at the top right of the screen to hide or show group visibility. This is useful for checking different views, sketches, and designs in the AR Viewer.